The first low-carbon low-temperature corrugated pr

2022-08-02
  • Detail

Quzhou's first low-carbon low-temperature corrugated production line settled in Kecheng

this set of low-carbon low-temperature corrugated production line is praised as a "new breakthrough" by experts of the National Industry Association for its low energy consumption, low emission and other characteristics

the experiment has high reproducibility. The figure is the production site on April 28

at 1:00 p.m. on April 28, the golden carton factory in Kecheng District, located in the Donggang Industrial Park of Kecheng, sounded a rumble. I saw three or five operators click on the computer control to make panels with the characteristics of low thermal conductivity, better thermal insulation and less occupied volume. Some loaded the web paper on the machine and passed through a nearly 100 meter long curing track, A paperboard required by Jiangshan customers is automatically offline... "The whole production process of printing, slotting and indentation has not only realized the whole process of computer tracking, but more importantly, the technology of 'low carbon cold setting (low temperature) corrugated production line' has passed the type identification of the national industry association and other expert groups." Wujingang, the person in charge of the enterprise, is proud to tell us that there are only 6 similar production lines in China, and Yiwu in our province also has one. In order to introduce this set of equipment, his enterprise spent more than 6million yuan, plus auxiliary facilities, with a total investment of more than 8million yuan. In August last year, the enterprise settled in Donggang Kecheng Industrial Park, and began to install new equipment. The commissioning has been completed this month

"Jiangshan's order of 10000 pieces of cardboard can be completed in one day." Wujingang said that at present, this production line can produce 20000 square meters of products every day. "With the staff becoming more familiar with the operating procedures and the improvement of the running in degree of the machine, the daily production capacity can reach 40000 to 50000 square meters."

the corrugated board production line is a flow operation line composed of web base paper through the processes of pressing corrugated, gluing, bonding and shaping, paper separation and pressing, horizontal cutting into specification boards, and finally stacking and output. Chenxirong, Deputy Secretary General of the paper packaging Committee of China Packaging Federation, frankly said: China's corrugated packaging industry is an industry with large scale, high energy consumption and large pollution sources. As the low-carbon economy has become a global revolution, the promotion and application of cold setting technology has reduced industrial costs, low carbon, energy saving, green and environmental protection, which is in line with the packaging circular economy and sustainable development

zhuqingdong, inventor of "low carbon low temperature corrugated shaping production line", began to study this technology 20 years ago. On January 24 this year, he introduced at the "production line finalization press conference" held in our city that the low-carbon low-temperature corrugated board production line did not have excellent weather resistance and chemical resistance. It was heated by boilers, gas and oil furnaces to avoid pollution. At the same time, it saved 3.5% of paper consumption year-on-year, reducing the cost. Based on an enterprise with an annual output of 20million square meters, 1500 tons of coal (equivalent to RMB 1.5 million-2million yuan) can be saved in a year. Calculated as 16 hours per day, 2000 kwh of electricity can be saved per day, and RMB 700000 yuan can be saved per year. Therefore, it is praised as "a new breakthrough in the international corrugated industry, which will undoubtedly trigger a new revolution in the paper packaging industry" by experts such as chenxirong, Deputy Secretary General of the China packaging joint paper Committee, zhangyaoquan, President of the Provincial Packaging Technology Association, and xuweihong, Vice Minister of science and technology of China Packaging Corporation

wujingang is a native of Changzhu village, Huangtankou Township, Qujiang District. He worked as a teacher after graduating from university. He started his business in the 1990s, but he has only been in the packaging industry for more than six years. Previously, he rented land to run a cardboard factory in Wantian Township, quhua and Kecheng district. He asked why he spent a lot of money to introduce this advanced technology and complete sets of equipment? Wujingang said frankly that he was optimistic about our city and the surrounding markets. However, some users often choose a 3M model when their experimental space is about 2 meters: "Quzhou is not only a big citrus City, but also has a market share of nearly 200million yuan per year for fruit packaging cartons. In recent years, the industrial development of our city has accelerated, and the number of cartons required has also increased day by day. For example, Kaishan group, we have to do more than 1million yuan per year."

"in addition, the sales radius of paperboard is 100-200 kilometers. Hangzhou, Shaoxing and other places have greater demand, and we have set our next market targets in these two places." Wujingang said that the elimination of high energy consumption and high pollution equipment as soon as possible and the launching of technologies and equipment in line with the direction of industrial development can not only enable enterprises to reach a new level, but also reduce production costs and win the initiative in the market competition

a ton of standard coal can produce 3.7 tons of carbon dioxide after burning in oxygen. The Chinese government recently announced that it will strive to complete the elimination of high energy consumption equipment such as industrial boilers, kilns, motors, fans and water pumps within three to five years

note: the reprinted contents are indicated with the source. The reprint is for the purpose of transmitting more information, and does not mean to agree with their views or confirm the authenticity of their contents

Copyright © 2011 JIN SHI